Auger Motor with 8″ Drill for Rippa R32 | 40mm pin

$1,950.00

● In Stock
$1,950
Ready for Pickup
Get a Quote

Hydraulic auger drive with 8-inch bit for RIPPA R32.

  • 40 mm mounting pins
  • 136 mm inside ear gap
  • 185 mm pin center spacing

Check all three dimensions and hydraulic requirements before purchase.

Description

Hydraulic Auger Drive with 8-Inch Bit for RIPPA R32

A hydraulic auger motor and 8-inch drill bit for fence posts, planting and general property work in suitable soils. This is the RIPPA R32 mounting version with 40 mm pins.

Check Attachment Fit Before Ordering

Compare these mounting dimensions with your excavator dipper or quick coupler. All three measurements must match; pin diameter alone does not confirm compatibility.

RIPPA R32 mounting reference — millimeters (mm)
Model A — Pin diameter B — Inside ear gap C — Pin centers
R32 40 mm 136 mm 185 mm
How to measure attachment fit: A pin diameter, B inside gap between mounting ears, C pin center-to-center distance
Tap the diagram to enlarge. Schematic only; not to scale.
  1. A — Pin diameter: measure across the cylindrical pin with calipers.
  2. B — Inside ear gap: measure the clear distance between the inner faces of the attachment mounting ears; compare with the dipper or coupler width.
  3. C — Pin centers: measure from the center of one mounting pin or hole to the center of the other.

Reference dimensions supplied for these RIPPA models. Check the actual attachment and machine before purchase, especially with aftermarket quick couplers or modified mounts. For hydraulic attachments, also confirm oil flow, pressure, hose fittings and couplers. Send us photos and your A/B/C measurements if you need help checking fit.

What’s Included

  • Hydraulic auger motor / drive
  • 8-inch-diameter auger bit
  • R32-style mounting bracket

Confirm the supplied pins, hoses and hydraulic coupler ends before ordering. Additional bit sizes and adapters are separate unless specified in your quote.

Compatibility and Hydraulic Setup

Intended for RIPPA R32 excavators with matching mounting dimensions. This version is not a direct-fit R18 or R22 attachment: those models use different mounting measurements.

Confirm the drive’s required flow, pressure, rotation control and hose connections against your machine before use. The mounting dimensions do not establish hydraulic compatibility.

Pickup or Delivery

Contact Best Seedling to confirm availability, pickup and delivery charges for this attachment.

Additional information

Attachment pin diameter

40 mm

Add to your equipment setup

Selected for this equipment family. Confirm the actual mounting dimensions, attachment weight and, for powered tools, hydraulic requirements before ordering.

Machines to compare for this attachment

Model references are a starting point. Verify the dimensions shown above and the actual machine configuration; adapters or hydraulic checks may be required.